We may earn a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate we earn from qualifying purchases.
Check the exact machine you need
Two different ownership choices. Compare fit and operating space below.
Selectorized pec fly / reverse delt
Choose a supplied weight stack and quick load changes. Confirm receiving, assembly and the full arm sweep.
Check selectorized model at TitanPlate-loaded fly machine
Choose this configuration when compatible plates and its operating space already fit your setup. Plates are separate.
Check plate-loaded model at TitanA pec-deck machine guides a chest-fly movement: the upper arms move toward the front of the body. A reverse-delt configuration changes your orientation and starting position so the arms open outward. A chest press pushes the hands away; it is a different exercise. Some machines contact the forearms through pads, while others use hand grips. Verify the contact design rather than buying from the category name.
Swipe or scroll the comparison to see every column.
| Configuration | Resistance / adjustment | Published dimensions | Cost and ownership tradeoff |
|---|---|---|---|
| Titan Selectorized Pec Fly and Reverse Delt, SKU 402070 | 200 lb stack; 2:1 pulley ratio; stated 10 lb starting resistance. Seven arm starts at 18° steps, five seat settings at 30 mm steps; vertical/horizontal hand grips. | 83 H × 58.5 D in; Titan lists 48 in width arms wide and 24.5 in arms closed. 445 lb machine. | $2,199.97 item price; stack included. Delivery route, assembly and floor suitability matter. Manufacturer specifications |
| Titan Plate-Loaded Fly Machine, SKU 401494 | Independent overhead cams and arms; simultaneous or unilateral operation. Adjustable seat and range; swiveling handles. Plates separate. | 65 H × 28 W × 32 D in frame listing; 61.5 in arms extended and 74.5 in arms/handles extended. 10 in loading sleeves, 49 mm diameter. | $579.97 item price; 109 lb machine. 300 lb user limit and 400 lb stated load capacity are separate ratings. Manufacturer specifications |
| Existing functional trainer + compatible handles | Independent cables allow fly/reverse-fly setups, subject to the trainer’s instructions. No dedicated seat or fixed machine arm path. | Measure cable travel, arm sweep, stance and any bench; tower footprint alone is insufficient. | Incremental spend may be $0 when your trainer and handles already support the movement. Compare cable configurations |
Frame footprint is not operating space
The plate-loaded Titan frame rectangle is 28 × 32 ÷ 144 = 6.22 sq ft. A 74.5-inch-wide extended-arm envelope over the same stated 32-inch depth is 16.56 sq ft—about 2.66 times the frame rectangle. This second rectangle is only a screening calculation: it does not establish the full dynamic sweep, plate-loading aisle, entry or service clearance.
Titan’s selectorized listing gives a 48 × 58.5-inch wide-arm rectangle, or 19.5 sq ft, and an 83-inch height. Do not compare its closed-arm width with the other machine’s fully extended handles. Tape out the full intended movement, add space to change plates or access the pin, and follow the exact manual’s installation requirements.
A 200 lb stack is not a 200 lb fly at the hands
Titan explicitly lists a 2:1 pulley ratio on the selectorized model. The stack label and force felt at each hand are therefore not interchangeable. Lever geometry, how the two arms share the mechanism, cable routing and friction also matter. We do not divide the stack label once and present that as a verified per-hand measurement. The maker separately lists 10 lb starting resistance; it should not be inferred from the 10 lb stack increments.
Similarly, the plate-loaded unit’s 400 lb capacity is not a tested effective resistance or an instruction to load 400 lb for a fly. Sleeve length and plate thickness may limit a usable load before a nominal capacity is reached.
Handle-based versus forearm-pad designs
Both Titan choices above use handles. A traditional bent-arm, forearm-pad pec deck places contact farther up the arm and may have a different elbow path and start adjustment. A machine that reverses for rear delts must provide appropriate grip, torso support and arm positioning in that direction. Do not assume that any seated chest-fly machine also supports reverse flies.
Choose the selectorized machine when quick changes between users and a supplied stack justify the cost and substantial installation. Choose the plate-loaded machine when you own compatible plates and can leave its full arm and loading space available. Use existing cables when flexibility and floor space matter more than a fixed station.
Complete cost: compare equivalent ownership
Observed October 24 item-price difference: $2,199.97 − $579.97 = $1,620.00. That is not the difference in complete installed cost. Quote machine + any missing plates/collars + floor protection + delivery/access surcharges + assembly + tax. Owned plates can make the second choice cheaper, but borrowing plates from another station adds handling and may interrupt training.
Manufacturer pages advertised free shipping; confirm your address, delivery service level and room access. A 445 lb selectorized machine requires a different receiving plan from a 109 lb frame. The manufacturer specification references remain separate from the affiliate buying links below. Check the selected model and complete delivered charge at Titan.
Compare fly alternatives with owned equipment and functional-trainer costs before dedicating a permanent bay.
Sources and comparison limits
Comparisons are based on manufacturer specifications and published product information, reviewed October 24, 2026. No hands-on testing, ownership, measured comfort or verified commission credit is claimed. Hero imagery is an editorial illustration; exact-model source photographs are identified separately. Prices are dated observations; verify the selected configuration and delivered charge.
Need a press rather than a fly?
For pressing handles away from the torso, compare plate-loaded and selectorized chest presses against your existing bench. The press and fly paths serve different equipment decisions; one name does not establish the other movement.