We may earn a commission when you buy through links on this page, at no extra cost to you.
Research-based buying guide · US prices and manufacturer specifications checked October 19, 2026.
Choose your weight sled by surface and usable lane. Choose a pull-only sled for drags, a push/pull model for both movements, or a wheeled resistance sled when repeatedly loading plates and dragging skis are poor fits for your space.
Comparisons are based on manufacturer specifications and published product information. The hero is a generated category illustration. Product photos below come from the manufacturer.
Jump to the shortlist, surface checks, lane and storage or complete cost.
Best weight sleds by the job you need done
| Sled / buyer | Listed size and unloaded mass | Included / missing | Main tradeoff |
|---|---|---|---|
| REP Pull Sled | 23 L × 15.5 W × 18 H in; 29 lb | Dual-loop straps and a carabiner; 16 in loadable post. Plates extra. | Compact drag choice; no push poles. Plates may extend beyond the base. |
| REP Push-Pull Sled | 40 × 38 × 42 in; 75 lb | Two removable poles and steel skis. Straps, harness, plastic-lined skis and plates extra. | Lower-cost push/pull option; the 38 in width still needs checking through doors. |
| REP 4-Post Push-Pull Sled | 34.8 × 22 × 42 in; 91.5 lb | Two poles, four pole sockets, steel underside; 17 in loadable post. Pull equipment and plates extra. | Move the poles to reverse direction without spinning the loaded sled. “4-post” does not mean four included poles. |
| Nike Weight Sled | 39 × 24.7 × 37.4 in; 90.4 lb | Plastic skis and two poles; straps and plates extra. | Manufacturer explicitly lists concrete, asphalt and turf; a useful comparison when plastic skis are a requirement. |
| Torque TANK M1 | 45.1 × 31.9 × 37.5 in; 78 lb | Magnetic resistance and airless tires; base package is not the pulling-accessory kit. | Higher entry cost; speed-dependent resistance is not a plate-loaded friction-sled equivalent. |
Dimensions are manufacturer-listed L × W × H for the stated sled configuration, not guaranteed loaded envelopes or minimum operating clearances. Published REP variant data showed the three sleds available at the check; Nike’s default sled and Torque’s base M1 were also available in their US product data. Stock and final delivery remain checkout-dependent.
Surface compatibility: skis do not make every floor suitable
| Surface / design | What the documentation supports | What to check before buying |
|---|---|---|
| REP two-post with steel skis | Steel is supplied. REP offers a separate plastic-lined replacement ski product for this Push-Pull model. | Get approval for the exact floor/skis combination; customer reviews are not manufacturer surface approval. |
| REP plastic-lined replacement skis | REP describes reduced scratching/noise on hard surfaces and warns asphalt can wear the plastic within months, depending on use. | Sold as a set of three for the two-post Push-Pull Sled. The replacement page does not establish four-post compatibility; do not budget it for that model without confirmation. |
| Nike supplied plastic skis | Nike lists concrete, asphalt and turf. | Check the turf/floor supplier’s restrictions, seams, coatings, gradients and permitted use. Plastic reduces abrasion; it does not guarantee no marks. |
| TANK M1 tires | Torque lists turf, rubber gym flooring, concrete, driveways and hardwood; this is a manufacturer claim. | Check traction, loose ground, transitions and the floor owner’s approval. “All-surface” is not permission to use any path. |
Do not buy a bare steel sled for finished indoor flooring on the assumption that rubber mats solve the problem. Mat movement, edges and surface damage still matter. For the rest of the garage floor, see the home-gym flooring guide.
Will the sled fit your training space?
- Check the loaded width. Measure your plates and any projecting clips or connectors, not just the sled base. They may make the setup wider than the listed frame.
- Check the whole push. You need room for the sled and your body at the start and finish, plus stopping space. The frame dimensions are for checking fit; they are not operating-clearance requirements.
- For pulls, include the pulling gear. Measure the deployed rope or strap and where you will stand. REP’s harness comes with a 7 ft strap; a long hand-over-hand rope is a separate purchase.
- Check the return and storage. With the REP four-post sled, you can move the poles instead of rotating the loaded frame. Leave access to walk around it. Measure the doorway and storage spot too; removing poles reduces height, not base width.
Buying for a short lane? The four-post design is useful for repeated out-and-back pushes because you can change ends without turning the sled. It still needs enough clear floor for each push and room for you to change sides.
Complete usable cost: count plates and pulling equipment
US prices checked October 19, before tax and any location-specific shipping. Each basket below uses one REP 45 lb iron plate pair at $169.98: that is 90 lb of added plates, not 45 lb. Use the plates you already own when compatible; this loading example is not an exercise prescription.
| Usable basket | Reproducible arithmetic | What the total does not buy |
|---|---|---|
| REP drag-only with 90 lb plates | $114.99 sled + $169.98 pair = $284.97 | Uses supplied straps; no pushing capability. Loaded mass: 29 + 90 = 119 lb. |
| REP two-post, push only, steel skis | $199.99 + $169.98 = $369.97 | No harness, rope or plastic skis. Loaded mass on supplied configuration: 165 lb. |
| REP two-post, harness drags, plastic-lined skis | $199.99 + $169.98 + $56.99 harness + $49.99 replacement-ski product = $476.95 | Set of three replacement skis included in this arithmetic. Long pulling rope and turf are extra. Accessory mass changes the total. |
| REP four-post, push and harness drag | $349.99 + $169.98 + $56.99 = $576.96 | Steel underside; no unverified ski upgrade or long pulling rope. Base plus plates = 181.5 lb before accessories. |
| Nike, push only, same added plates | $390.00 + $169.98 = $559.98 | No pull strap or harness. Plastic skis included; loaded mass before extra accessories = 180.4 lb. |
| TANK M1 base push setup | $849.00 with built-in resistance; added plates not required for resistance | Pulling attachments are separate. Torque’s $1,049 Athlete Kit includes the sled, console, cradles, V-strap, tow strap/harness and phone holder. Check the selected kit. |
REP specifies that the $49.99 replacement skis are sold in sets of three for its two-post Push-Pull Sled. The $476.95 basket therefore includes the sled, one ski set, harness/7 ft strap and 90 lb of plates. Your delivered checkout still depends on shipping/tax, and the floor must be approved for use. A long hand-over-hand rope or turf lane is a separate purchase.
Sled mass, added plates and resistance are different
Total moving mass = unloaded sled + added plates + attached equipment. The force needed to move a friction sled also depends on the surface, skis, slope, conditions and speed. Identical plates on turf and concrete do not create identical difficulty. TANK magnetic resistance changes with speed and setting; its 78 lb machine mass cannot be translated into a HYROX plate prescription.
For racing, read the current-season HYROX sled loads and train the actual movement on appropriate turf. Buying the same total mass does not reproduce race friction.
What about an Amazon sled?
Amazon can be useful for comparing delivery and returns, but we could not verify a current exact sled listing, seller, stock and included equipment together. We therefore have no Amazon sled recommendation in this shortlist. Match the manufacturer model, surface approval, ski package, straps and plate-hole size before substituting a marketplace listing.
Which sled should you buy?
- Only backward drags or resisted walks: start with the REP Pull Sled if its supplied pulling setup and surface fit your plan.
- Push and pull at a lower starting cost: compare the REP two-post with the complete basket; its wide base and ski upgrade can change the decision.
- Repeated out-and-back pushes: compare the four-post’s swappable pole positions with the cost and inconvenience of turning a loaded frame.
- Approved hard surface with supplied plastic skis: compare Nike’s complete price, rather than base sled prices alone.
- Frequent use without plate changes: consider Torque’s resistance system if the higher price and different training feel suit the job.
Sources and method. Current product pages, US variant price/availability data and FAQs: REP Pull Sled, Push-Pull, 4-Post, replacement skis, harness; Nike; Torque M1; REP warranty. REP lists lifetime sled-frame coverage and one year for skids, subject to its exclusions; wear is not a durability guarantee. Costs are editorial arithmetic from dated listings, not quotes. Surface compatibility not stated by the manufacturer is marked unconfirmed.